2024
C. Grill, S. Diebels, and A. Jung. „Determination of an RVE and identifying a representative idealised model for specific surface and volume of metal foams.“ Materials Today Communications, p. 108317, 2024.
2023
A. Engel and A. Jung, „Simulation of a multimaterial model for modified auxetic structures,“ Acta Polytechnica CTU Proceedings, vol. 42, 2023.
B. Oberhausen, A. Plohl, B.-J. Niebuur, S. Diebels, A. Jung, T. Kraus and G. Kickelbick, „Self-Healing Iron Oxide Polyelectrolyte Nanocomposites: Influence of Particle Agglomeration and Water on Mechanical Properties,“ Nanomaterials, vol. 13, p. 2983, 2023.
R. Kose, N. Novak, S. Grednev, Z. Ren, M. Vesenjak and A. Jung, „Numerical Prediction of the Yield Surface of a Chiral Auxetic Structure,“ Advanced Engineering Materials, vol. 26, p. 2300914, 2023.
S. Grednev, Steude, S. Bronder, O. Niggemann and A. Jung, „AI-Assisted Study of Auxetic Structures,“ Acta Polytechnica CTU Proceedings, vol. 42, pp. 32-36, 2023.
2022
S. Bronder, F. Herter, D. Bähre and A. Jung, „Optimized design for modified auxetic structures based on a neural network approach,“ Materials Today Communications, vol. 32, p. 103931, 2022.
M. Felten, M. Fries, T. Fı́la, P. Zlámal, J. Falta, O. Jiroušek and A. Jung, „High Strain-Rate Compression Experiments on Ni/Polyurethane Hybrid Metal Foams Using the Split-Hopkinson Pressure Bar Technique,“ Advanced Engineering Materials, vol. 24, p. 2100872, 2022.
S. Bronder, F. Herter, A. Röhrig, D. Bähre and A. Jung, „Design Study for Multifunctional 3D-Reentrant Auxetics,“ Advanced Engineering Materials, vol. 24, p. 2100816, 2022.
K. König, M. Reis, M. Vielhaber and A. Jung, „Application of ultraviolet (uv) radiation and fluorescence for dic measurements-quality improvement,“ Optics and Lasers in Engineering, vol. 158, p. 107140, 2022.
S. Grednev, S. Bronder, F. Kunz, M. Reis, S.-M. Kirsch, F. Welsch, S. Seelecke, S. Diebels and A. Jung, „Applicability of correlated digital image correlation and infrared thermography for measuring mesomechanical deformation in foams and auxetics,“ GAMM-Mitteilungen, vol. 45, p. e202200014, 2022.
C. Leblanc, N. G. Kilingar, A. Jung, K. E. M. Kamel, T. J. Massart, L. Noels and E. Béchet, „Analysis of an open foam generated from computerized tomography scans of physical foam samples,“ International Journal for Numerical Methods in Engineering, vol. 123, pp. 4267-4295, 2022.
A. Jung, C. Redenbach, K. Schladitz and S. Staub, „3D Image-Based Stochastic Micro-structure Modelling of Foams for Simulating Elasticity,“ in Research in Mathematics of Materials Science, M. I. Español, M. Lewicka, L. Scardia and A. Schlömerkemper, Eds., Cham, Springer International Publishing, 2022, p. 257–281.
R. Rothermel, W. Panfilenko, P. Sharma, A. Wald, T. Schuster, A. Jung and S. Diebels, „A method for determining the parameters in a rheological model for viscoelastic materials by minimizing Tikhonov functionals,“ Applied Mathematics in Science and Engineering, vol. 30(1), pp. 141-165, 2022.
F. Kunz, and A. Jung, „Investigation of the Structural Coating Homogeneity in Open‐Porous Nickel/Polyurethane Hybrid Foams Produced by Flow‐Controlled Electrodeposition,“ Advanced Engineering Materials, vol. 24, p. 2200262, 2022.
2021
J. Gawlitza, R. Kose, M. Roland, S. Diebels, A. Bücker and A. Jung, „Quantifizierung biomechanischer Eigenschaften von Tracheen – Radiologie trifft technische Mechanik,“ 2021.
C. Grill, M. Fries, A. Jung and S. Diebels, „Numerical and experimental investigations of the electrodeposition process on open porous foams, determination of the parameter influence on the coating homogeneity,“ International Journal of Heat and Mass Transfer, vol. 180, p. 121791, 2021.
J. Luksch, A. Jung, C. Pauly, R. Derr, P. Gruenewald, M. Laub, M. Klaus, C. Genzel, C. Motz, F. Mücklich and others, „Ni/Al-Hybrid Cellular Foams: An Interface Study by Combination of 3D-Phase Morphology Imaging, Microbeam Fracture Mechanics and In Situ Synchrotron Stress Analysis,“ Materials, vol. 14, p. 3473, 2021.
S. Bronder, S. Diebels and A. Jung, „Neural Networks for Structural Optimisation of Mechanical Metamaterials,“ PAMM, vol. 20, p. e202000238, 2021.
J. Luksch, T. Bleistein, K. Koenig, J. Adrien, E. Maire and A. Jung, „Microstructural damage behaviour of Al foams,“ Acta Materialia, vol. 208, p. 116739, 2021.
S. Bronder, M. Adorna, T. Fíla, P. Koudelka, J. Falta, O. Jiroušek and A. Jung, „Hybrid Auxetic Structures: Structural Optimization and Mechanical Characterization,“ Advanced Engineering Materials, vol. 23, no. 5, May 2021.
S. Dancette, Y. Amani, J. Luksch, A. Jung and E. Maire, „Scientific topic:-Materials and structure design-Simulation and Modeling,“ in Workshop Proceedings, LyonSE&N & ELyT Global workshop, 2021.
L. Blanc, A. Jung, S. Diebels, A. Kleine and M. O. Sturtzer, „Blast wave mitigation with galvanised polyurethane foam in a sandwich cladding,“ Shock Waves, vol. 31, pp. 525-540, September 2021.
2020
T. Bleistein, S. Diebels and A. Jung, „Parameter identification for open cell aluminium foams using inverse calculation,“ Computers & Mathematics with Applications, vol. 79, p. 2644–2654, 2020.
T. Bleistein, M. Reis, X. Cheng, C. Redenbach, S. Diebels and A. Jung, „Multiscale microsphere modelling of open-cell metal foams enriched by statistical analysis of geometric parameters,“ Mechanics of Materials, vol. 142, p. 103295, 2020.
Y. Amani, S. Dancette, J. Luksch, A. Jung and E. Maire, „Micro-tensile behavior of struts extracted from an aluminum foam,“ Materials Characterization, vol. 166, p. 110456, 2020.
M. Felten, M. Fries, A. Pullen, W. G. Proud and A. Jung, „Investigation of Strain-Rate Effects in Ni/PU Hybrid Foams under Low-Impact Velocities,“ Advanced Engineering Materials, vol. 22, p. 1901589, 2020.
M. Felten, S. Diebels and A. Jung, „Experimental investigation of initial yield surfaces of solid foams and their evolution under subsequent loading,“ Materials Science and Engineering: A, vol. 791, p. 139762, 2020.
M. Reis, S. Diebels and A. Jung, „DIC Measurements on Single Struts of Ni/PU Hybrid Foams—Damage Behaviour During Three-Point Bending,“ in Developments and Novel Approaches in Biomechanics and Metamaterials, B. E. Abali and I. Giorgio, Eds., Cham, Springer International Publishing, 2020, p. 423–430.
T. Bleistein, A. Jung and S. Diebels, „A microsphere-based material model for open cell metal foams,“ Continuum Mechanics and Thermodynamics, vol. 32, p. 255–267, 2020.
M. Reis, K. König, S. Diebels, and A. Jung, „Micromechanical Characterisation of Ni/PU Hybrid Foams,“ Materials, vol. 13(17), p. 3746, 2020.
2019
M. Reis, S. Diebels and A. Jung, „Noise reduction for DIC measurements,“ Pamm, vol. 19, p. e201900077, 2019.
A. Jung and S. Diebels, „Micromechanical characterization of metal foams,“ Advanced Engineering Materials, vol. 21, p. 1900237, 2019.
J. Luksch, A. Jung, C. Pauly, C. Motz, F. Mücklich and F. Schaefer, „Effect of Pretreatment on Interface Stability and Morphology of Ni/Al Hybrid Foams by in situ Microcantilever Fracture Experiment,“ Procedia Structural Integrity, 2019.
A. Jung, K. Al Majthoub, C. Jochum, S.-M. Kirsch, F. Welsch, S. Seelecke and S. Diebels, „Correlative digital image correlation and infrared thermography measurements for the investigation of the mesoscopic deformation behaviour of foams,“ Journal of the Mechanics and Physics of Solids, vol. 130, p. 165–180, 2019.
F. Concas, S. Diebels and A. Jung, „Multiaxial investigation of pvc foams and analysis of the deformation mechanism by 3D-DIC,“ Acta Polytechnica CTU Proceedings, vol. 25, p. 6-11, 2019.
A. Jung, T. Bleistein and S. Diebels, „Modelling of cellular materials by a microsphere‐based material model,“ PAMM, vol. 19(1), p. e201900081, 2019.
C. Grill, A. Jung and S. Diebels, „Investigation of the electrodeposition parameters on the coating process on open porous media,“ PAMM, vol. 19(1), p. e201900106, 2019.
R. Derr, A. Jung and S. Diebels, „Development of a simulation model for the automatic optimization of tools for multi‐dimensional tube forming,“ PAMM, vol. 19(1), p. e201900185, 2019.
F. Concas, S. Diebels and A. Jung, „Multiaxial failure surface of PVC foams and monitoring of deformation bands by three-dimensional digital image correlation,“ Journal of the Mechanics and Physics of Solids, vol. 130, p. 195-215, 2019.
R. Derr, A. Jung and S. Diebels, „Development of a simulation model for the automatic optimization of tools for tube embossing,“ CIRP Journal of Manufacturing Science and Technology, vol. 26, p. 50-69, 2019.
M. Reis, M. Adorna, O. Jiroušek and A. Jung, „Improving DIC accuracy in experimental setups“ Advanced Engineering Materials, vol. 21(7), p. 1900092, 2019.
2018
A. Jung, S. Bronder, S. Diebels, M. Schmidt and S. Seelecke, „Thermographic investigation of strain rate effects in Al foams and Ni/Al hybrid foams,“ Materials & Design, vol. 160, p. 363–370, 2018.
M. Adorna, P. Zlámal, T. Fı́la, J. Falta, M. Felten, M. Fries and A. Jung, „Testing of hybrid nickel-polyurethane foams at high strain-rates using Hopkinson bar and digital image correlation,“ 2018.
T. Bleistein, A. Jung and S. Diebels, „Multiscale characterisation and simulation of open cell metal foams,“ PAMM, vol. 18, p. e201800211, 2018.
C. Grill, A. Jung and S. Diebels, „Modelling and simulation of the coating process on open porous metal foams,“ PAMM, vol. 18, p. e201800254, 2018.
A. Jung, J. Luksch, S. Diebels, C. Motz and F. Schäfer, „In-situ and ex-situ microtensile testing of individual struts of Al foams and Ni/Al hybrid foams,“ Materials and design, vol. 153, pp. 104-119, 2018.
A. Jung and S. Diebels, „Yield surfaces for solid foams: A review on experimental characterization and modeling,“ GAMM-Mitteilungen, vol. 41, p. e201800002, 2018.
S. Heinze, T. Bleistein, A. Düster, S. Diebels and A. Jung, Experimental and numerical investigation of single pores for identification of effective metal foams properties, vol. 98, Wiley Online Library, 2018, p. 682–695.
A. Jung, J. Luksch, T. Bleistein, J. Adrien and E. Maire „In‐situ and ex‐situ micro mechanical testing of open‐cell metal foams,“ PAMM, vol. 18(1), p. e201800213, 2018.
2017
A. Jung, Z. Chen and S. Diebels, Nanoindentation of Ni/Al hybrid foams, published by John Wiley & Sons in „Applied Nanoindentation in Advanced Materials“, 2017.
A. Jung and S. Diebels, „Microstructural characterisation and experimental determination of a multiaxial yield surface for open-cell aluminium foams,“ Materials & Design, vol. 131, p. 252–264, 2017.
A. Jung, J. Luksch, M. Felten, M. Reis, D. R. Sory, A. D. Pullen, … and G. Solomos, „Investigation of strain‐rate effects in Al foams and Ni/Al hybrid foams on different scales,“ PAMM, vol. 17(1), p. 317-318, 2017.
2016
T. Bleistein, A. Jung and S. Diebels, „Thermo-mechanically coupled modelling of cellular MgO-C refractories under thermal shock,“ PAMM, vol. 16, pp. 429-430, October 2016.
A. Jung and S. Diebels, „Synthesis and mechanical properties of novel Ni/PU hybrid foams: a new economic composite material for energy absorbers,“ Advanced Engineering Materials, vol. 18, p. 532–541, 2016.
A. Jung, A. D. Pullen and W. G. Proud, „Strain-rate effects in Ni/Al composite metal foams from quasi-static to low-velocity impact behaviour,“ Composites Part A: Applied Science and Manufacturing, vol. 85, p. 1–11, 2016.
A. Jung and S. Diebels, „Modelling of Metal Foams by a Modified Elastic Law,“ Mechanics of Materials, vol.101, pp. 61-70, 2016.
A. Jung, Z. Chen, J. Schmauch, C. Motz and S. Diebels, „Micromechanical characterisation of Ni/Al hybrid foams by nano- and microindentation coupled with EBSD,“ Acta Materialia, vol. 102, pp. 38-48, 2016.
T. Fı́la, O. Jiroušek, A. Jung and I. Kumpová, „Identification of strain fields in pure Al and hybrid Ni/Al metal foams using X-ray microtomography under loading,“ Journal of Instrumentation, vol. 11, p. C11017, 2016.
T. Fı́la, I. Kumpová, P. Koudelka, P. Zlámal, D. Vavřı́k, O. Jiroušek and A. Jung, „Dual-energy X-ray micro-CT imaging of hybrid Ni/Al open-cell foam,“ Journal of Instrumentation, vol. 11, p. C01005, 2016.
2015
A. Jung and S. Diebels, „Thermo-mechanical properties of magnesia carbon foam composites,“ in Coupled Problems in SCience and Engineering VI, San Servolo, Venice, Italy, 18-20 May 2015, 2015.
A. Jung and S. Diebels, „Thermo-mechanical modelling of cellular ceramic commposites by a multiphase approach of porous media,“ Proceedings in Applied Mathematics and Mechanics, vol. 15, pp. 393-394, 2015.
A. Jung, G. Falk, D. Petri and S. Diebels, „Thermal shock resistivity of hybrid carbon foam materials: Experimental and model predictions,“ Mechanics of Materials, vol. 82, p. 13–27, 2015.
A. Jung, M. Larcher, O. Jirousek, P. Koudelka and G. Solomos, „Strain-rate Dependence for Ni/Al Hybrid Foams,“ European Physical Journal, vol. 94, pp. 04030-1-5, 2015.
K. Weißhaar, M. Weinmann, A. Jung, O. Weber and H. Natter, „Replication of microstructured tools for electrochemical machining applications,“ International Journal of Advanced Manufacturing Technology, 2015.
Klavzar, M. Chirolli, B. Reck and A. Jung, „Protective Performance of Hybrid Metal Foams as MMOD Shields,“ Procedia Engineering, vol. 103, pp. 294-301, 2015.
E. Lach, A. Jung and M. Larcher, „Preface to metallic foams under dynamic loading,“ International Journal of Impact Engineering, p. 2, 2015.
A. Jung, L. A. A. Beex, S. Diebels and S. P. A. Bordas, „Open-Cell Aluminium Foams with Graded Coatings as Passively Controllable Energy Absorbers,“ Materials & Design, vol. 87, pp. 36-41, 2015.
S. Heinze, Z. Chen, A. Jung, S. Diebels and A. Düster, „Numerical analysis of Ni/Al hybrid metal foams using the finite cell method,“ Proceedings in Applied Mathematics and Mechanics, vol. 15, pp. 299-300, 2015.
A. Jung, Z. Chen, H. Seibert and S. Diebels, „Multi-scale modelling of Ni/Al hybrid metal foams from atomic to microscale,“ Civil-Comps Proceedings, vol. Paper 145, pp. p. 1-16, 2015.
A. Jung, M. Wocker, Z. Chen and H. Seibert, „Microtensile testing of open-cell metal foams – Experimental setup, micromechanical properties,“ Materials & Design, vol. 88, pp. 1021-1030, 2015.
A. Jung, T. Grammes and S. Diebels, „Micro structural motivated phenomenological modelling of metal foams – Experiments and Modelling,“ Archive of Applied Mechanics, vol. 85, pp. 1147-1160, 2015.
A. Jung, S. Diebels and E. Lach, Improved mechanical properties by nanostructuring – special considerations under dynamic load conditions, M. Aliofkhazraei, Ed., published by Wiley in „Handbook of Mechanical Nanostructuring“, p. 181-209 , 2015.
A. Jung, D. Klis and F. Goldschmidt, „Experiments, modeling and simulation of the magnetic behavior of inhomogeneously coated nickel/aluminium hybrid foams,“ Journal of Magnetism and Magnetic Materials, vol. 378, p. 178–185, 2015.
S. Diebels, A. Jung, Z. Chen, H. Seibert and T. Scheffer, „Experimentelle Mechanik: Von der Messung zum Materialmodell,“ GAMM Rundbrief, vol. 2, 2015.
Z. Chen, A. Jung, S. Heinze, A. Düster and S. Diebels, „Experimental and numerical characterization of the mechanical properties of Ni/Al hybrid metal foams from the atomic to the microscale,“ Book of Abstracts-Extract, p. 68, 2015.
A. Jung, M. Weinmann and H. Natter, Electroforming and elctrodeposition on complex 3D geometries – special requirements and new methods, A. S. H. M. Mahmood Alifkhazraei, Ed., published by Springer in „Handbook of Nanoelectrochemistry: Electrochemical Synthesis Methods, Properties and Characterization Techniques“, 2015, pp. 941-970.
Z. Chen, A. Jung, S. Heinze, A. Düster and S. Diebels, „Characterization of Ni/Al hybrid foam from atomic to microscale,“ Proceedings in Applied Mathematics and Mechanics, vol. 15, p. 283–284, 2015.
Foetz, D., Quinten, D., Falk, G., Jung, A., Bleistein, T., & Diebels, S. Cellular Magnesia/Carbon Refractories: Processing,(Thermo-) Mechanical Characterization and Finite Element Modeling, 2015.
2014
A. Jung and S. Diebels, „Thermo-mechanical modelling of cellular hybrid refractories,“ PAMM, vol. 14, p. 459–460, 2014.
A. Jung, G. Falk, D. Petri and S. Diebels, „Refractory MgO-C composites with a cellular carbon structure, Part 2: Microstructural optimization by thermo-mechanical simulation,“ Keramische Zeitschrift, vol. 66, p. 295–300, 2014.
G. Falk, D. Petri, A. Jung and S. Diebels, „Refractory MgO-C Composites with a Cellular Carbon Structure, Part 1: Experimental Characterization,“ Keramische Zeitschrift, vol. 66, p. 221–225, 2014.
A. Jung, E. Lach and S. Diebels, „New hybrid foam materials for impact protection,“ International Journal of Impact Engineering, vol. 64, pp. 30-38, 2014.
A. Jung, S. Diebels, A. Koblischka-Veneva, J. Schmauch, A. Barnoush and M. R. Koblischka, „Microstructural analysis of electrochemical coated open-cell metal foams by EBSD and nanoindentation,“ Advanced Engineering Materials, vol. 16, pp. 15-20, 2014.
A. Jung and S. Diebels, „Hybrid metal foams: experimental observations and phenomenological modelling,“ Technische Mechanik, vol. 34, pp. 12-22, 2014.
A. Jung, G. Falk, D. Petri and S. Diebels, „Feuerfeste MgO-C Komposite mit zellularer Kohlenstoffstruktur, Teil 2: Mikrostrukturoptimierung durch thermo-mechanische Simulation,“ Keramische Zeitschrift, Vols. 05-06, pp. 295-300, 2014.
G. Falk, D. Petri, A. Jung and S. Diebels, „Feuerfeste MgO-C Komposite mit zellularer Kohlenstoffstruktur, Teil 1: Experimentelle Charakterisierung,“ Keramische Zeitschrift, vol. 04, pp. 221-225, 2014.
G. Falk, A. Jung, W. Da Silveira and S. Diebels, „Experimental characterization and thermo-mechanical modelling of micro structure interactions in cellular carbon magnesia refractories,“ Journal of Ceramic Sience and Technology, vol. 5 (2), pp. 101-114, 2014.
S. Diebels, T. Grammes, F. Goldschmidt and A. Jung, „A microscopically motivated continuum model for cellular materials,“ Proceedings in Applied Mathematics and Mechanics, vol. 14, p. 421–422, 2014.
2013
M. Weinmann, A. Jung and H. Natter, „Magnetic field-assisted electroforming of complex geometries,“ Journal of Solid State Electrochemistry, vol. 17, p. 2721–2729, 2013.
A. Jung, Galvanoformen von nano-Nickel und nano-Invar, PhD thesis – Universität des Saarlandes, 2013.
2012
A. Jung, Offenporige, nanobeschichtete Hybrid-Metallschäume: Herstellung und mechanische Eigenschaften, PhD thesis – Universität des Saarlandes, 2012.
A. Jung, M. R. Koblischka, E. Lach, S. Diebels and H. Natter, „Hybrid Metal Foams: Mechanical Testing and Determination of Mass Flow Limitations During Electroplating,“ International Journal of Material Science, vol. 2, p. 97–107, 2012.
2011
R. Clerigo, M. Paulino, F. Teixeira-Dias, A. Jung, R. Hempelmann and S. Diebels, „Numerical modelling of the ballistic performance of open-cell aluminium hybrid-foam targets,“ in Proceedings LWAG 2011 Aveiro Conference – New design concepts in light-weight armour for vehicles, Aveiro, Portugal, 2011.
A. Jung, H. Natter, S. Diebels, E. Lach and R. Hempelmann, „Nanonickel coated aluminum foam for enhanced impact energy absorption,“ Advanced Engineering Materials, vol. 13, pp. 23-28, 2011.
A. Jung, H. Natter, S. Diebels, E. Lach and R. Hempelmann, „Nanocrystalline nickel/aluminium hybrid-foams for energy absorption and ballistic protection,“ in Proceedings LWAG 2011 Aveiro Conference – New design concepts in light-weight armour for vehicles, Aveiro, Portugal, 2011.
A. Jung, H. Natter, R. Hempelmann, S. Diebels and E. Lach, „Improved Mechanical Properties of Nano-nickel Strengthened Open Cell Metal Foams,“ Dynamic Behavior of Materials, vol. 1, p. 83–87, 2011.
2010
A. Jung, H. Natter, R. Hempelmann, S. Diebels, M. R. Koblischka, U. Hartmann and E. Lach, „Study of the magnetic flux density distribution of nickel coated aluminum foams,“ Journal of Physics: Conference Series, vol. 200, p. 082011, 2010.
H. Natter, A. Jung, E. Lach and R. Hempelmann, „Nanostructured Ni/n-Al_2O_3 metal matrix composites prepared by pulsed electrodeposition,“ ECS Transactions, vol. 25, pp. 9-18, 2010.
A. Jung, H. Natter, R. Hempelmann and E. Lach, „Metal foams, WO 2010/142436 A1“. 2010.
A. Jung, H. Natter, S. Diebels, E. Lach and R. Hempelmann, „Improvement of the energy absorption capacity of open.cell aluminium foams by the electrodeposition of nanocrystalline metals,“ in Proceedings Cellular Materials, Cellmat 2010, Dresden, Germany, 2010.
A. Jung, H. Natter, R. Hempelmann, S. Diebels and E. Lach, „Improved mechanical properties of nano-nickel strengthened open cell metal foams,“ Society for Experimental Mechanics – SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010, vol. 1, pp. 340-344, 2010.
A. Jung, H. Natter, R. Hempelmann, S. Diebels, M. R. Koblischka, U. Hartmann and E. Lach, „Electrodeposition of Nanocrystalline Metals on Open Cell Metal Foams: Improved Mechanical Properties,“ ECS Transactions, vol. 25, p. 165–172, 2010.
R. Hempelmann, A. Jung, A. Natter and E. Lach, „Economising on materials using nanocoating [Materialeinsparung durch nanobeschichtung],“ Galvanotechnik, vol. 101, pp. 1972-1976, 2010.
2009
A. Jung, H. Natter, R. Hempelmann and E. Lach, „Nanocrystalline alumina dispersed in nanocrystalline nickel: Enhanced mechanical properties,“ Journal of Materials Science, vol. 44, pp. 2725-2735, 2009.
A. Jung, H. Natter, E. Lach and R. Hempelmann, „Nano nickel strengthened open cell metal foams under quasi-static and dynamic loading,“ in Proceedings DYMAT 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Brussels, Belgium, 2009.
A. Jung, H. Natter, R. Hempelmann and E. Lach, „Metal foams, US 020120175534 A1“. 2009.
2008
A. Jung, H. Natter, E. Lach and R. Hempelmann, „Behaviour of nano Nickel based composites and nano nickel under high loading rate,“ in Proceedings 18th DYMAT Technical Meeting – The Behaviour of Bulk Nanomaterials and Metallic Glasses under Dynamic Loadings, Bourges, France, 2008.
2007
A. Jung, „Diplomarbeit: Galvanische Herstellung von Metall/Hartstoff-Kompositen,“ 2007.
Letzte Änderung: 21. März 2024