Dr.-Ing. Adam Sanders

1. Sanders, A. (2019):
   Maschinelles Sehen zur Prozessüberwachung beim Mikrotiefbohren von Polymethylmethacrylat
   Dissertation, Shaker Verlag, Berichte aus dem Institut für Konstruktions- und Fertigungstechnik, Band 50, ISBN: 978-3-8440-7083-5.

Digitalisierung der Produktion und Lean Management

1. Sanders, A.; K. Subramanian, K.R.; Redlich, T.; Wulfsberg; J.P. (2017):
   Industry 4.0 and Lean Management – Synergy or Contradiction? 
   In: IFIP WG 5.7 International Conference, APMS 2017, Hamburg, Germany, September 3-7, 2017, Proceedings, Part I.
2. Herzog, S.; Sanders, A.; Redlich, T.; Wulfsberg, J.P. (2016):
   Mitarbeiterqualifikation in der Smart Factory 
   In: ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb), Jahrg. 111 (2016) Nr. 10, Carl Hanser Verlag München, S. 653-657.
3. Sanders, A.; Elangeswaran, C.; Wulfsberg, J.P. (2016):
   Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing 
   Journal of Industrial Engineering and Management, 9(3), 2016, 811-833, ISSN 2013-0953, DOI: http://dx.doi.org/10.3926/jiem.1940.
4. Sanders, A.; Wulfsberg, J.P. (2015):
   Industrie 4.0: Shopfloor Management im Wandel 
   In: ZWF (Zeitschrift für wirtschaftlichen Fabrikbetrieb), Jahrg. 110 (2015) Nr. 10, Carl Hanser Verlag München, S. 653-656.

Werkzeugmaschinebau und Fertigungstechnik

1. Sanders, A.; Wulfsberg, J.P. (2018):
   Deep hole drilling of polymethyl methacrylate with small diameters by actively compensating the hole straightness deviation
   In: Proceedings of the 18th euspen International Conference, Venice 2018, mit akad. Qualitätssicherung.
2. Wulfsberg, J.P.; Sanders, A. (Eds.) (2017):
   Small Machine Tools for Small Workpieces – Final Report of the DFG Priority Program 1476 
   Series: Lecture Notes in Production Engineering, ISBN: 978-3-319-49267-4, Springer.
3. Wulfsberg, J.P.; Redlich, T.; Röhlig, B.; Sanders, A.; Grimske, S.; Kohrs, P. (2017):
   Introduction to the Priority Programme SPP1476 — Small Machine Tools for Small Workpieces 
   In: Wulfsberg/Sanders (Eds.): Small Machine Tools for Small Workpieces. DOI 10.1007/978-3-319-49269-8_1, pp 1-18, Springer.
4. Kong, N.; Sanders, A.; Rösner, M.; Friedrich, R.; Dirksen, F.; Bauma, E.; Schuster, T.; Lammering, R.; Wulfsberg, J.P. (2017):
   Functional Integrated Feed-Units Based on Flexible Mechanisms in Small Machine Tools for Small Workpieces 
   In: Wulfsberg/Sanders (Eds.): Small Machine Tools for Small Workpieces. DOI 10.1007/978-3-319-49269-8_11, pp 161-178, Springer.
5. Sanders, A.; Wulfsberg, J.P. (2016):
   Modulare Werkzeugmaschinen in der Mikrofertigung
   In: Ingenieurspiegel Maschinenbau: Fachmagazin für Ingenieure, Ausg. 03/2016, S. 14-16, ISSN 1868-5919.
6. Sanders, A.; Wulfsberg, J.P. (2016):
   A linear and lifting stage on basis of compliant mechanisms for the realisation of a correction mechanism in a machine tool to perform micro deep hole drills in a round stock
   In: Proceedings of the 16th euspen International Conference, Nottingham, 2016, pp. 417-418.
7. Sanders, A.; Wulfsberg, J.P. (2016):
   Micro Deep Hole Drilling Machine with an integrated Correction Mechanism
   In: Proceedings of the 11th International Conference on Micro Manufacturing, Orange County, California, USA, March 2016.
8. Kong, N.; Sanders, A.; Wulfsberg, J.P. (2015):
   On the Design Methodology of Flexure-Based Compliant Mechanisms by Utilizing Pseudo-Rigid-Body Models with 3-DOF Joints 
   In: Proceedings of the 14th IFToMM World Congress, Taipei, Taiwan, October 25-30, 2015, DOI Number: 10.6567/IFToMM.14TH.WC.OS3.021.
9. Sanders, A.; Wulfsberg, J.P. (2015):
   Concept of a correction mechanism to prevent the drift of a drill bit for micro deep hole drilling
   In: Proceedings of the 15th euspen International Conference, Leuven, 2015, pp. 329-330.